Agilos Wiki - Benutzerbeiträge [de]

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-30T09:09:02Z

Marie: /* Confirmation */

[[Category:Infrastruktur]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:black">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1.Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip.]

2.Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced'''' button;

c.Holding the SHIFT key, press'''' Provisioning Modules'''..'.

d.Check the mark" '''Allow to install unsigned modules'''";

e.Disable the snom module;

f.Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

Uploading Custom Provisioning Modules for Hardware Phones

2023-03-30T09:08:09Z

Marie: Marie verschob Seite Uploading Custom Provisioning Modules for Hardware Phones nach Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

#WEITERLEITUNG [[Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones]]

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-30T09:08:09Z

Marie: Marie verschob Seite Uploading Custom Provisioning Modules for Hardware Phones nach Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T14:11:59Z

Marie:

[[Category:Dokumentationen]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:black">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1.Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip. ]

2.Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f.Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T14:01:32Z

Marie: /* Environment */

[[Category:Dokumentationen]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:black">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1.Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip.]

2.Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f.Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T14:00:59Z

Marie: /* Process */

[[Category:Dokumentationen]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:black">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1.Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip.]

2.Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f.Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T13:57:24Z

Marie:

[[Category:Dokumentationen]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:darksalmon">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1.Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip.]

2.Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f.Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T13:50:44Z

Marie:

[[Category::Dokumentationen]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:darksalmon">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1.Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip.]

2.Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f.Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T13:35:42Z

Marie:

[[Category:Raspberry]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:darksalmon">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1.Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip.]

2.Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f.Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T13:34:51Z

Marie:

[[Category:Rasberry]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:darksalmon">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1.Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip.]

2.Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f.Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T13:26:22Z

Marie: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:darksalmon">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1.Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip.]

2.Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f.Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T13:22:13Z

Marie: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:darksalmon">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1.Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip.]

2.Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:
<i><pre style="background-color:yellow">
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached[https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip])
</pre>
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f.Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T13:20:59Z

Marie: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:darksalmon">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1.Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip.]

2.Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:
<i><pre style="background-color:yellow">
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached[https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip])
</pre>
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f.Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T13:02:36Z

Marie:

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:darksalmon">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip.]

2. Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:
<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip)]
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T12:39:16Z

Marie: /* Overview */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip]

2. Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:
<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip)]
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T12:34:13Z

Marie: /* Process */

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T12:33:46Z

Marie: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip]

2. Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:
<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip)]
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1500px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1500px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T12:27:04Z

Marie: /* Confirmation */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip]

2. Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:
<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip)]
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T12:26:53Z

Marie: /* Confirmation */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip]

2. Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:
<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip)]
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T12:22:03Z

Marie: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip]

2. Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:
<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip)]
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T12:17:38Z

Marie: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip]

2. Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:
<i>
<pre style="background-color:lightgray">
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified. zipsnom-785_modified.zip])

</pre>
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T12:13:17Z

Marie: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip]

2. Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified. zipsnom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T12:12:53Z

Marie: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip]

2. Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

<i> firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified. zipsnom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T12:11:02Z

Marie: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip]

2. Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

''
<i> firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified. zipsnom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T12:09:35Z

Marie: /* Confirmation */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip]

2. Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

''
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified. zipsnom-785_modified.zip])

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T11:47:08Z

Marie: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip]

2. Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

''
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified. zipsnom-785_modified.zip])

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> 10 KB Downloaded</p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_modified.zip]
<p> 10KB Downloaded </p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T11:46:30Z

Marie: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip]

2. Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

'' firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified. zipsnom-785_modified.zip])

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> 10 KB Downloaded</p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_modified.zip]
<p> 10KB Downloaded </p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T11:41:07Z

Marie: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip]

2. Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

'' firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified. zipsnom-785_modified.zip])

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> 10 KB Downloaded</p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_modified.zip]
<p> 10KB Downloaded </p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T11:27:06Z

Marie: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_modified.zip]
2. Unzip[https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip ] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

''<pre style="background-color:whitesmoke">

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_original.zip]
</pre>

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> 10 KB Downloaded</p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_modified.zip]
<p> 10KB Downloaded </p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T11:22:47Z

Marie: /* Confirmation */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:
''<pre style="background-color:whitesmoke">

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [[snom-785_modified.zip]]
</pre>

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> 10 KB Downloaded</p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_modified.zip]
<p> 10KB Downloaded </p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T10:51:36Z

Marie:

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:
''<pre style="background-color:whitesmoke">

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [[snom-785_modified.zip]]
</pre>

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip]
10 KB Downloaded

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip]
10KB Downloaded

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T09:50:19Z

Marie: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]
== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:
''<pre style="background-color:whitesmoke">

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [[snom-785_modified.zip]]
</pre>

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[[snom-785_modified.zip]]
10 KB Downloaded

[[snom-785_original.zip]]
10KB Downloaded

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T09:42:12Z

Marie:

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]
== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached [[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:
''<pre style="background-color:whitesmoke">

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached'' [[snom-785_modified.zip]] )''
</pre>

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[[snom-785_modified.zip]]
10 KB Downloaded

[[snom-785_original.zip]]
10KB Downloaded

Datei:002jpg.jpeg

2023-03-29T09:28:55Z

Marie: Marie lud eine neue Version von „Datei:002jpg.jpeg“ hoch: left

phone_types file after adding appropriate entries.
[[image:002.jpg|200px]]

Datei:002jpg.jpeg

2023-03-29T09:27:40Z

Marie:

phone_types file after adding appropriate entries.
[[image:002.jpg|200px]]

Datei:002.jpg

2023-03-29T09:26:19Z

Marie:

phone_types file after adding appropriate entries.
[[image:002.jpg|100px]]

Datei:002jpg.jpeg

2023-03-29T09:22:44Z

Marie: phone_types file after adding appropriate entries.

phone_types file after adding appropriate entries.

Datei:002.jpg

2023-03-29T09:15:03Z

Marie: Marie lud eine neue Version von „Datei:002.jpg“ hoch: Zurückgesetzt auf die Version vom 29. März 2023, 08:21 Uhr

phone_types file after adding appropriate entries.

Datei:002.jpg

2023-03-29T09:14:17Z

Marie: Marie lud eine neue Version von „Datei:002.jpg“ hoch: phone_types file after adding appropriate entries.

phone_types file after adding appropriate entries.

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T08:41:18Z

Marie:

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]
== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached[[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:
''<pre style="background-color:whitesmoke">

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached'' [[snom-785_modified.zip]])''
</pre>

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[[snom-785_modified.zip]]
10 KB Downloaded

[[snom-785_original.zip]]
10KB Downloaded

Datei:001.jpg

2023-03-29T08:22:38Z

Marie: firmware_types file after adding appropriate entries.

firmware_types file after adding appropriate entries.

Datei:002.jpg

2023-03-29T08:21:19Z

Marie: phone_types file after adding appropriate entries.

phone_types file after adding appropriate entries.