Agilos Wiki - Benutzerbeiträge [de]

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-30T11:30:50Z

172.22.0.241: /* Process */

[[Category:Infrastruktur]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:black">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1.Modify the attached [http://share.agilos.de/f/d4f2826bc6f44dd1a3c1/?dl=1 snom-785_original.zip]

2.Unzip [http://share.agilos.de/f/d4f2826bc6f44dd1a3c1/?dl=1 snom-785_original.zip] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [http://share.agilos.de/f/1f7b8eb30a554e08b782/?dl=1 snom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced'''' button;

c.Holding the SHIFT key, press'''' Provisioning Modules'''..'.

d.Check the mark" '''Allow to install unsigned modules'''";

e.Disable the snom module;

f.Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[http://share.agilos.de/f/1f7b8eb30a554e08b782/?dl=1 snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>
[http://share.agilos.de/f/d4f2826bc6f44dd1a3c1/?dl=1 snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-30T11:28:25Z

172.22.0.241: /* Confirmation */

[[Category:Infrastruktur]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:black">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1.Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip.]

2.Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced'''' button;

c.Holding the SHIFT key, press'''' Provisioning Modules'''..'.

d.Check the mark" '''Allow to install unsigned modules'''";

e.Disable the snom module;

f.Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[http://share.agilos.de/f/1f7b8eb30a554e08b782/?dl=1 snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>
[http://share.agilos.de/f/d4f2826bc6f44dd1a3c1/?dl=1 snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-30T09:02:32Z

172.22.0.241:

[[Category:Infrastruktur]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:black">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1.Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip.]

2.Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced'''' button;

c.Holding the SHIFT key, press'''' Provisioning Modules'''..'.

d.Check the mark" '''Allow to install unsigned modules'''";

e.Disable the snom module;

f.Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

[[test]]

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-30T06:49:41Z

172.22.0.241: /* Process */

[[Category:Dokumentationen]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:black">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1.Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip.]

2.Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced'''' button;

c.Holding the SHIFT key, press'''' Provisioning Modules'''..'.

d.Check the mark" '''Allow to install unsigned modules'''";

e.Disable the snom module;

f.Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-30T06:17:37Z

172.22.0.241: /* Process */

[[Category:Dokumentationen]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:black">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1.Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip.]

2.Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press'''' Provisioning Modules'''..'.

d.Check the mark" '''Allow to install unsigned modules'''";

e.Disable the snom module;

f.Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-30T06:15:15Z

172.22.0.241: /* Process */

[[Category:Dokumentationen]]

== Overview ==

<p>Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how</p>
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond;color:black">'''Note:''' It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1.Modify the attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip.]

2.Unzip [https://central-supportdesk.zendesk.com/hc/article_attachments/360003025559/snom-785_original.zip snom-785_original.zip] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

<i>
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached [https://central-supportdesk.zendesk.com/hc/article_attachments/360002938800/snom-785_modified.zip snom-785_modified.zip])
</i>

phone_types file after adding appropriate entries.

[[Datei:002.jpg|1200px]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg|1200px]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f.Press Upload and select the attached snom-785.zip file.

== Confirmation ==
<font size="2">Not supported phones will be auto-provisioned after this procedure.</font>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014241520/snom-785_modified.zip snom-785_modified.zip]
<p> <font size="1">10 KB Download </font></p>

[https://support.keriooperator.gfi.com/hc/en-us/article_attachments/360014244119/snom-785_original.zip snom-785_original.zip]
<p> <font size="1">10 KB Download </font></p>

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T08:04:16Z

172.22.0.241: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]
== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:blanchedalmond; color:darksalmon">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached[[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:
<pre style="background-color:whitesmoke">
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached'' [[snom-785_modified.zip]])
</pre>

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[[snom-785_modified.zip]]
10 KB Downloaded

[[snom-785_original.zip]]
10KB Downloaded

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T07:50:31Z

172.22.0.241: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]
== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:beige; color:brown">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached[[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:
<pre style="background-color:gainsboro">
firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached'' [[snom-785_modified.zip]])
</pre>

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[[snom-785_modified.zip]]
10 KB Downloaded

[[snom-785_original.zip]]
10KB Downloaded

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T07:35:07Z

172.22.0.241: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]
== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:beige; color:brown">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.
</div>

1. Modify the attached[[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached'' [[snom-785_modified.zip]])

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[[snom-785_modified.zip]]
10 KB Downloaded

[[snom-785_original.zip]]
10KB Downloaded

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T07:25:25Z

172.22.0.241: /* Process */

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]
== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:beige; color:brown">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.</div>

1. Modify the attached[[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached'' [[snom-785_modified.zip]])

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Datei:001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[[snom-785_modified.zip]]
10 KB Downloaded

[[snom-785_original.zip]]
10KB Downloaded

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T07:24:24Z

172.22.0.241:

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]
== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:beige; color:brown">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.</div>

1. Modify the attached[[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached'' [[snom-785_modified.zip]])

phone_types file after adding appropriate entries.

[[Datei:002.jpg]]

firmware_types file after adding appropriate entries.

[[Image:https://support.keriooperator.gfi.com/hc/article_attachments/360014241440/001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[[snom-785_modified.zip]]
10 KB Downloaded

[[snom-785_original.zip]]
10KB Downloaded

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T07:10:03Z

172.22.0.241:

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]
== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:beige; color:brown">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.</div>

1. Modify the attached[[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached'' [[snom-785_modified.zip]])

phone_types file after adding appropriate entries.

[[Image:https://support.keriooperator.gfi.com/hc/article_attachments/360014244099/002.jpg]]

firmware_types file after adding appropriate entries.

[[Image:https://support.keriooperator.gfi.com/hc/article_attachments/360014241440/001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[[snom-785_modified.zip]]
10 KB Downloaded

[[snom-785_original.zip]]
10KB Downloaded

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T07:08:52Z

172.22.0.241: Die Seite wurde geleert.

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T07:08:10Z

172.22.0.241:

[[Category:Uploading Custom Provisioning Modules for Hardware Phones ]]
== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:beige; color:brown">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.</div>

1. Modify the attached[[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached'' [[snom-785_modified.zip]])

phone_types file after adding appropriate entries.

[[Image:https://support.keriooperator.gfi.com/hc/article_attachments/360014244099/002.jpg]]

firmware_types file after adding appropriate entries.

[[Image:https://support.keriooperator.gfi.com/hc/article_attachments/360014241440/001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[[snom-785_modified.zip]]
10 KB Downloaded

[[snom-785_original.zip]]
10KB Downloaded

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T07:02:49Z

172.22.0.241:

[[categorie:Uploading Custom Provisioning Modules for Hardware Phones ]]

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:beige; color:brown">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.</div>

1. Modify the attached[[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached'' [[snom-785_modified.zip]])

phone_types file after adding appropriate entries.

[[Image:https://support.keriooperator.gfi.com/hc/article_attachments/360014244099/002.jpg]]

firmware_types file after adding appropriate entries.

[[Image:https://support.keriooperator.gfi.com/hc/article_attachments/360014241440/001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[[snom-785_modified.zip]]
10 KB Downloaded

[[snom-785_original.zip]]
10KB Downloaded

Kategorien/Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T06:46:22Z

172.22.0.241: Die Seite wurde geleert.

Kategorien/Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T06:46:13Z

172.22.0.241:

Kategorie:Agilos Group

2023-03-29T06:30:03Z

172.22.0.241: Die Seite wurde geleert.

Kategorie:Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T06:27:53Z

172.22.0.241: Die Seite wurde geleert.

Kategorie:Uploading Custom Provisioning Modules for Hardware Phones

2023-03-29T06:27:14Z

172.22.0.241: Die Seite wurde neu angelegt: „== Overview == Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how to auto-provision "not supported" …“

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:beige; color:brown">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.</div>

1. Modify the attached[[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached'' [[snom-785_modified.zip]])

phone_types file after adding appropriate entries.

[[Image:https://support.keriooperator.gfi.com/hc/article_attachments/360014244099/002.jpg]]

firmware_types file after adding appropriate entries.

[[Image:https://support.keriooperator.gfi.com/hc/article_attachments/360014241440/001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[[snom-785_modified.zip]]
10 KB Downloaded

[[snom-785_original.zip]]
10KB Downloaded

Kategorie:Seiten mit defekten Dateilinks

2023-03-29T06:20:36Z

172.22.0.241: Die Seite wurde geleert.

Kategorien/Uploading Custom Provisioning Modules for Hardware Phones

2023-03-28T14:47:05Z

172.22.0.241: Die Seite wurde geleert.

Kategorien/Uploading Custom Provisioning Modules for Hardware Phones

2023-03-28T14:46:30Z

172.22.0.241: Die Seite wurde neu angelegt: „---- Hilfe für viele Bereiche == Overview == Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how t…“

----
Hilfe für viele Bereiche

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:beige; color:brown">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.</div>

1. Modify the attached[[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached'' [[snom-785_modified.zip]])

phone_types file after adding appropriate entries.

[[Image:https://support.keriooperator.gfi.com/hc/article_attachments/360014244099/002.jpg]]

firmware_types file after adding appropriate entries.

[[Image:https://support.keriooperator.gfi.com/hc/article_attachments/360014241440/001.jpg]]

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[[snom-785_modified.zip]]
10 KB Downloaded

[[snom-785_original.zip]]
10KB Downloaded

Kategorie:Hilfe/Uploading Custom Provisioning Modules for Hardware Phones

2023-03-28T14:45:13Z

172.22.0.241: Die Seite wurde geleert.

Kategorie:Hilfe/Uploading Custom Provisioning Modules for Hardware Phones

2023-03-28T14:44:41Z

Kategorie:Hilfe

2023-03-28T14:42:33Z

172.22.0.241: Die Seite wurde geleert.

Kategorie:Hilfe

2023-03-28T14:41:52Z

172.22.0.241:

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:beige; color:brown">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.</div>

1. Modify the attached[[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached'' [[snom-785_modified.zip]])

phone_types file after adding appropriate entries.

[[Datei:https://support.keriooperator.gfi.com/hc/article_attachments/360014244099/002.jpg|mini|002.jpg]]

firmware_types file after adding appropriate entries.

<img src=https://support.keriooperator.gfi.com/hc/article_attachments/360014244099/002.jpg">

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[[snom-785_modified.zip]]
10 KB Downloaded

[[snom-785_original.zip]]
10KB Downloaded

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-28T14:39:08Z

172.22.0.241: Die Seite wurde geleert.

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-28T14:37:53Z

172.22.0.241:

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:beige; color:brown">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.</div>

1. Modify the attached[[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached'' [[snom-785_modified.zip]])

phone_types file after adding appropriate entries.

[[Datei:https://support.keriooperator.gfi.com/hc/article_attachments/360014244099/002.jpg|mini|002.jpg]]

firmware_types file after adding appropriate entries.

<img src=https://support.keriooperator.gfi.com/hc/article_attachments/360014244099/002.jpg">

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[[snom-785_modified.zip]]
10 KB Downloaded

[[snom-785_original.zip]]
10KB Downloaded

Kerio Operator Uploading Custom Provisioning Modules for Hardware Phones

2023-03-28T14:37:19Z

== Overview ==

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how
to auto-provision "not supported" hardware phones.

==Environment ==

You should have at least 2.6.4 (preferably 2.6.5 Beta)

== Requirements ==

Access to Kerio Operator Webadmin.

== Process ==

<div style="background:beige; color:brown">'''Note''': It's highly recommended to have the recent Kerio Operator configuration backup before applying any
of these changes.</div>

1. Modify the attached[[snom-785_original.zip.]]
2. Unzip [[snom-785_original.zip]] and then modify phone_types and firmware_types files by adding appropriate
entries.

In this case to add Snom D712 support:

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached'' [[snom-785_modified.zip]])

phone_types file after adding appropriate entries.

[[Datei:https://support.keriooperator.gfi.com/hc/article_attachments/360014244099/002.jpg|mini|]]

firmware_types file after adding appropriate entries.

<img src=https://support.keriooperator.gfi.com/hc/article_attachments/360014244099/002.jpg">

a.In the administration, go to '''Provisioned Phones;'''

b.Press the ''''Advanced''''button;

c.Holding the SHIFT key, press''''Provisioning Modules'''..'.

d.Check the mark"'''Allow to install unsigned modules'''";

e.Disable the snom module;

f. Press Upload and select the attached snom-785.zip file.

== Confirmation ==
Not supported phones will be auto-provisioned after this procedure.

[[snom-785_modified.zip]]
10 KB Downloaded

[[snom-785_original.zip]]
10KB Downloaded

Kategorie:Hilfe

2023-03-28T14:00:11Z

172.22.0.241: Die Seite wurde geleert.

Kategorie:Hilfe

2023-03-28T13:58:14Z

172.22.0.241: Hilfe

•U
Uploading Custom Provisioning Modules for Hardware Phones

Kategorie:Hilfe

2023-03-28T13:33:28Z

172.22.0.241: Die Seite wurde geleert.

Kategorie:Hilfe

2023-03-28T13:32:40Z

172.22.0.241: Uploading Custom Provisioning Modules for Hardware Phones

[[Category:Hilfe]]

Kategorie:Hilfe

2023-03-28T13:30:18Z

172.22.0.241:

"[[Category: Uploading Custom Provisioning Modules for Hardware Phones ]]"

Kategorie:Hilfe

2023-03-28T13:27:58Z

172.22.0.241: Die Seite wurde geleert.

Kategorie:Hilfe

2023-03-28T13:27:43Z

172.22.0.241:

Kategorie:Hilfe

2023-03-28T11:51:43Z

172.22.0.241:

Hilfe für viele Bereiche

Kategorie:Hilfe

2023-03-28T11:48:38Z

172.22.0.241:

Hilfe für viele Bereiche
[[Category:Uploading Custom Provisioning Modules for Hardware Phones|sortieren]]

Kategorie:Hilfe

2023-03-28T10:58:54Z

172.22.0.241: Der Seiteninhalt wurde durch einen anderen Text ersetzt: „Hilfe für viele Bereiche“

Hilfe für viele Bereiche

Kategorie:Hilfe

2023-03-28T10:58:21Z

172.22.0.241: Uploading Custom Provisioning Modules for Hardware Phones

Hilfe für viele Bereiche

Overview

Kerio Operator doesn't support all Hardware phones. This article provides a step by step instruction on how to auto-provision "not supported" hardware phones.

Environment

You should have at least 2.6.4 (preferably 2.6.5 Beta)

Requirements

Access to Kerio Operator Webadmin.

Process

Note: It's highly recommended to have the recent Kerio Operator configuration backup before applying any of these changes.

Modify the attached snom-785_original.zip.

Unzip snom-785_original.zip and then modify phone_types and firmware_types files by adding appropriate entries.

In this case to add Snom D712 support:

firmware_types
fw_712 "snom 712" firmware SCRIPT=fw
phone_types
snom712 4 "snom 712" SECURE_SUPPORT=1 FW=fw_712
(see attached snom-785_modified.zip)

phone_types file after adding appropriate entries.
002.jpg

firmware_types file after adding appropriate entries.
001.jpg

In the administration, go to Provisioned Phones;

Press the 'Advanced' button;

Holding the SHIFT key, press 'Provisioning Modules..'.

Check the mark "Allow to install unsigned modules";

Disable the snom module;

Press Upload and select the attached snom-785.zip file.

Confirmation

Not supported phones will be auto-provisioned after this procedure.

snom-785_modified.zip
10 KB Download
snom-785_original.zip
10 KB Download